Skip to product information
1 of 4

APRILIA SX/RX 125 CARBON RACER

APRILIA SX/RX 125 CARBON RACER

Regular price €219,00 EUR
Regular price Sale price €219,00 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.
The sticker set breathes new life into your SX or RX 125 and transforms it into an impressive carbon racer. With a deceptively real simulation, the carbon styling creates a high-quality look. Thanks to the air channels, the stickers can be easily attached. The set also contains a test adhesive to try out and a squeegee that makes installation child's play.

materials

2D premium stickers

• Weatherproof, extra UV-resistant
• Self-adhesive
• Water repellent
• Extremely resilient
• Long outdoor durability
• Extremely resilient
• High color intensity
• Adhesion and durability only on a smooth, grease-, dust- and silicone-free surface
• Recommended temperature when applying: between 5 and 25 degrees Celsius
• Initially repositionable - full adhesive strength after approx. 24 hours
• Removable without residue

Shipping and Refunds

We ship worldwide with DHL

If products are not in stock, they will be reprinted within 2-3 working days. In general, the following delivery times apply:

European Union: 7 business days
Switzerland: 9 working days
Germany: 3 working days
Outside Europe: 14 working days

mount

a) Dry application (suitable for all sticker sets)

1. Scan the QR code on your sticker set for video assembly instructions

2. Wash your motorcycle

3. Clean the splice with white spirit or a similar agent

4. Remove the stickers from the sheet and stick them in the right place with tape

5. Remove the backing film from the sticker and use the squeegee to apply the adhesive bubble-free

b) Wet bonding (for very large areas, subsequent moving possible)

1. Remove the backing film and spray the adhesive side of the sticker with slightly soapy water

2. Also spray the surface to be glued with the soapy water. Once the sticker is in place, squeeze the soapy water out from the center to the edge of the sticker

Remove last bubbles

1. Bubbles can be squeezed out to the edge with the squeegee

2. The sticker can be softened with a hair dryer, pressed into fine cracks or bubbles removed

3. If small bubbles are still visible, you can pierce them with a needle and press them down with your fingers

View full details