BMW R1300 GS SUPERBLACK
BMW R1300 GS SUPERBLACK
We are close to realizing the Superbold sticker set. If you would like to be one of the first to get the set, write to us: info@rubberdust.com
Thanks to the air channels, the stickers are very easy to apply. The set also includes a test sticker to try out and a squeegee that makes assembly easy.
materials
materials
2D premium stickers
• Weatherproof, extra UV-resistant
• Self-adhesive
• Water repellent
• Extremely resilient
• Long outdoor durability
• Extremely resilient
• High color intensity
• Adhesion and durability only on a smooth, grease-, dust- and silicone-free surface
• Recommended temperature when applying: between 5 and 25 degrees Celsius
• Initially repositionable - full adhesive strength after approx. 24 hours
• Removable without residue
Shipping and Refunds
Shipping and Refunds
We ship worldwide with DHL
If products are not in stock, they will be reprinted within 2-3 working days. In general, the following delivery times apply:
• European Union: 7 business days
• Switzerland: 9 working days
• Germany: 3 working days
• Outside Europe: 14 working days
mount
mount
a) Dry application (suitable for all sticker sets)
1. Scan the QR code on your sticker set for video assembly instructions
2. Wash your motorcycle
3. Clean the splice with white spirit or a similar agent
4. Remove the stickers from the sheet and stick them in the right place with tape
5. Remove the backing film from the sticker and use the squeegee to apply the adhesive bubble-free
b) Wet bonding (for very large areas, subsequent moving possible)
1. Remove the backing film and spray the adhesive side of the sticker with slightly soapy water
2. Also spray the surface to be glued with the soapy water. Once the sticker is in place, squeeze the soapy water out from the center to the edge of the sticker
Remove last bubbles
1. Bubbles can be squeezed out to the edge with the squeegee
2. The sticker can be softened with a hair dryer, pressed into fine cracks or bubbles removed
3. If small bubbles are still visible, you can pierce them with a needle and press them down with your fingers