YAMAHA TÉNÉRÉ 700 RALLY DAKAR 82 EDITION
YAMAHA TÉNÉRÉ 700 RALLY DAKAR 82 EDITION
Couldn't load pickup availability
Specially designed for the Yamaha Ténéré 700 Rally Edition, this sticker set pays homage to the legendary Dakar drivers of the 80's.
Please note that the blue color is not part of the decal set but represents the color of the bike itself.
Our sticker sets are characterized by a protective laminate that makes them washable, lightfast and weatherproof. We only use high-quality materials that have been specially optimized for this purpose. Thanks to the air channel technology, the stickers are easy to install. The full adhesive strength develops within 24 hours, so that the stickers can easily be repositioned until they are optimally positioned.
The stickers easily peel out with the sheet's release liner and are numbered for easy application according to an overview. A squeegee for easier application is included. Scan the QR code on the decal kit to access video installation instructions.
materials
materials
2D premium stickers
• Weatherproof, extra UV-resistant
• Self-adhesive
• Water repellent
• Extremely resilient
• Long outdoor durability
• Extremely resilient
• High color intensity
• Adhesion and durability only on a smooth, grease-, dust- and silicone-free surface
• Recommended temperature when applying: between 5 and 25 degrees Celsius
• Initially repositionable - full adhesive strength after approx. 24 hours
• Removable without residue
Shipping and Refunds
Shipping and Refunds
We ship worldwide with DHL
If products are not in stock, they will be reprinted within 2-3 working days. In general, the following delivery times apply:
• European Union: 7 business days
• Switzerland: 9 working days
• Germany: 3 working days
• Outside Europe: 14 working days
mount
mount
a) Dry application (suitable for all sticker sets)
1. Scan the QR code on your sticker set for video assembly instructions
2. Wash your motorcycle
3. Clean the splice with white spirit or a similar agent
4. Remove the stickers from the sheet and stick them in the right place with tape
5. Remove the backing film from the sticker and use the squeegee to apply the adhesive bubble-free
b) Wet bonding (for very large areas, subsequent moving possible)
1. Remove the backing film and spray the adhesive side of the sticker with slightly soapy water
2. Also spray the surface to be glued with the soapy water. Once the sticker is in place, squeeze the soapy water out from the center to the edge of the sticker
Remove last bubbles
1. Bubbles can be squeezed out to the edge with the squeegee
2. The sticker can be softened with a hair dryer, pressed into fine cracks or bubbles removed
3. If small bubbles are still visible, you can pierce them with a needle and press them down with your fingers
